Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment on a Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Glove compartment

See other generations:
Video tutorial

This video will teach you how to remove the glove compartment on a Volkswagen Golf 4 in a few simple steps. First, before removing the glove compartment, you will need to disassemble the entire central, front, and rear section of the car, including the gear lever and handbrake.

Only at this point will you be able to remove the glove compartment after unscrewing the six screws that hold it in place, using the appropriate screwdriver. During this operation, be careful to disconnect the wires from the glove compartment light.

In just a few minutes, you will have successfully removed your part!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box in the Volkswagen Golf?
How to Remove the Glove Box in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) If you need to remove the glove box in the Volkswagen Golf 7, for instance, to replace the cabin filter, follow this tutorial. First, open the glove …
How to Remove the Glove Box from a Volkswagen Golf?
How to Remove the Glove Box from a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To remove the glove box from the front passenger side of the Volkswagen Golf, open the glove box and unscrew the screws that secure it from the top. …
Removing the Glove Box of a Volkswagen Golf 6
Removing the Glove Box of a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video tutorial, you will see how to remove the glove box of a sixth-generation Volkswagen Golf, following the simple steps outlined below. Fi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos