Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Switch on Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Instrument cluster

See other generations:
Video tutorial

Set the switch to "zero" and push it back (towards the dashboard). When it is in, turn it slightly to the right and you will hear a click: at this point, you can pull it out. Disconnect the connector by pressing on the lever.

Install the new switch (costs less than £20 online) by connecting the connector and inserting it. Finally, while holding it firmly in place, rotate it counterclockwise and let it go: if you have followed the procedure correctly, the switch will be in place.

This is a very simple operation that takes very little time, and you obviously do not need to go to a garage.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob of a Volkswagen Golf
How to Replace the Gear Knob of a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before you can start, sit in the driver's seat of your Volkswagen Golf. Begin by putting the gear lever into neutral. Next, unclip the gaiter from it…
How to Remove and Replace the Gear Gaiter and Gear Knob on the Volkswagen Golf
How to Remove and Replace the Gear Gaiter and Gear Knob on the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's video tutorial, you will learn how to remove and replace the gear gaiter and gear knob on the Volkswagen Golf in simple and quick steps. F…
Fuses Location for Bulbs and Replacement on Volkswagen Golf 5
Fuses Location for Bulbs and Replacement on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, access the fuses for the bulbs to replace the faulty one on a Volkswagen Golf Mk5. First, locate the internal fuse box on the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos