Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light and Replacing Bulbs on a Volkswagen Polo

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

See other generations:
Video tutorial

Open the boot lid and also open the small side flap disguised in the boot fabric. To do this, simply unscrew the closing cap. Now, with the flap open, you can access the back of the light and unscrew the light unit from behind.

Try to pull the light out of its housing: if it does not come out easily, use a plastic lever (not metal!). Disconnect the connector by opening the clip with a flat screwdriver. Now, with the light unit in hand, you can open it from the back (there are four clips) and unscrew the bulb you wish to replace.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Change the Rear Headlamp Bulb on VW Polo
How to Change the Rear Headlamp Bulb on VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Remove the damaged bulbs mounted on the rear headlamp of a Volkswagen Polo. Open the boot lid, remove the side covering cloth. Unscrew the plastic se…
Replacing the Rear Headlamp Bulb on a Polo
Replacing the Rear Headlamp Bulb on a Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Need to replace the bulb inside the rear headlamp of a Volkswagen Polo? Open the boot and see how to remove the headlamp. Unscrew the plastic retaini…
How to Change the Bulbs in the Rear Headlamp on a Volkswagen Polo 5
How to Change the Bulbs in the Rear Headlamp on a Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will see in this tutorial video how to remove and replace the bulbs in the rear headlamp on the Volkswagen Polo 6R, fifth series, in simple…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos