Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Polo
  6. : How to change the rear light bulb Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Rear light bulb
Operation: How to change the rear light bulb Vw Polo

Disassembly of the damaged bulbs mounted on a rear light of a Volkwagen Polo. We open the trunk lid, remove the side trim cloth. Unscrew the plastic clamping screw of the rear light, disconnect the power supply terminals connected to the light and pull it away from its seat. We replace the damaged bulbs with new ones (same voltage). We mount the headlight and tighten the screw, close the inspection compartment with the cover cloth. We operate the control knob above the dashboard and check the operation of the new bulbs.


Posted on 5 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos