Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs and Pads

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Brake rotors

See other generations:
Video tutorial

Lift the vehicle with a jack and remove the wheel; then unscrew the fastening pins of the brake caliper located at the rear (you may need to lever with a screwdriver between the pads to slightly retract the piston and remove the caliper). Unscrew the fastening pin of the brake disc, remove the old one and fit the new one, ensuring to also replace the fastening pin (usually included in the kit). Using a C-clamp or a pair of pliers, fully retract the caliper piston, insert the new pads and remount the caliper.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Discs and Pads
Replacement of Front Discs and Pads
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Lift the vehicle on a lift and remove the front wheel; disconnect the wear sensor connector, remove the protective cap from the caliper fastening bol…
Replacement of Rear Brake Discs and Brake Pads
Replacement of Rear Brake Discs and Brake Pads
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Lift the vehicle on a lift and remove the wheel where the repair will take place. Unscrew the fastening bolts of the brake caliper located at the rea…
How to Change the Front Brake Discs on a Volkswagen Golf V
How to Change the Front Brake Discs on a Volkswagen Golf V
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here’s how to change the front brake discs on a Volkswagen Golf V. First, lift the vehicle; do not rely on your jack, use a hydraulic jack and two ax…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos