Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Front Discs and Pads

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake rotors

See other generations:
Video tutorial

Lift the vehicle on a lift and remove the front wheel; disconnect the wear sensor connector, remove the protective cap from the caliper fastening bolts and unscrew them to remove the caliper; retract the caliper piston and remove the fastening bolts of the brake disc to take it off; clean any dirt from the disc seat on the hub and from the caliper support using a wire brush; use copper grease to lubricate the cleaned areas, wash the new disc to remove protective oil residues, and proceed in reverse by securing the disc to the hub, inserting the new pads, securing the brake caliper, and reconnecting the wear sensor; pump the brake pedal until it offers the correct resistance and check the brake fluid level in the reservoir.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here’s how to change the front brake discs on a Volkswagen Golf V. First, lift the vehicle; do not rely on your jack, use a hydraulic jack and two ax…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The following steps will show us how to disassemble and replace the front brake discs of the Volkswagen Golf, following the instructions below. First…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the front brake pads on a Volkswagen Golf 4, safely lift the vehicle and remove the affected wheel. Next, unscrew the bolts securing the b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos