Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake discs of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Brake rotors

See other generations:
Video tutorial

The following steps will show us how to disassemble and replace the front brake discs of the Volkswagen Golf, following the instructions below. First, lift the vehicle and start by removing the front wheel; then remove the brake caliper from the disc, unscrewing the fixing screws and pressing on the caliper piston to retract it, as shown in the video.

At this point, unscrew the brake disc screws, remove it and replace it with the new original one; also replace the brake pads, performing the same operation on the other side.


Posted on 2 February 2025 by ScegliAuto


Related tutorials

How to Change the Front Brake Discs on a Volkswagen Golf V
How to Change the Front Brake Discs on a Volkswagen Golf V
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here’s how to change the front brake discs on a Volkswagen Golf V. First, lift the vehicle; do not rely on your jack, use a hydraulic jack and two ax…
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to dismantle and replace the handbrake cable of the Volkswagen Golf. First, get inside t…
How to Replace the Front Brake Disc on a Volkswagen Golf
How to Replace the Front Brake Disc on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Before you can begin, lift the front end of your Volkswagen Golf. Start by unscrewing and removing the bolts that secure the wheel to the hub, then r…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos