Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Do you want to reset the service light on the Polo? Here’s how to complete the maintenance reset. Enter the vehicle, turn on the ignition, and see the warning light illuminated.

Turn off the ignition and press the button located near the car's speedometer. Turn the key to the 'on' position, keep the button pressed, and press the left button as shown in the video.

Turn off the ignition again. Upon the next ignition, the service light will be off. Always remember to perform these settings with the engine off for safety reasons.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Volkswagen Polo
Resetting the Service Light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, discover the steps to reset the service light for routine maintenance on the Volkswagen Polo. First, get inside the vehicle and turn on the ig…
Resetting the Inspection and Maintenance Warning on the Volkswagen Polo
Resetting the Inspection and Maintenance Warning on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today we will discover the steps on how to reset the service light for the regular maintenance of the engine oil change on the Volkswagen Polo. First…
Resetting the Maintenance or Service Light on a Volkswagen Polo
Resetting the Maintenance or Service Light on a Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this guide, we will discover the steps that will allow us to reset the service light for the regular maintenance oil change of the Volkswagen Polo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos