Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the On-Board Computer from a Volkswagen Passat B8

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Onboard computer

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the on-board computer from a Volkswagen Passat B8, following the steps outlined below. First, get inside the vehicle and start by removing the plastic trim on the dashboard, prying it off from the sides; then disconnect the electrical connector.

Now, take off the cover of the on-board computer and unscrew all the fastening screws located on the sides; then remove the computer and disconnect the connectors and electrical cables found on the back, as shown in the video. Follow the video until the end for reassembly!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Change the Language of the On-Board Computer on a Volkswagen Passat?
How to Change the Language of the On-Board Computer on a Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To change the language of the on-board computer on a Volkswagen Passat, turn on the instrument cluster to enable the use of the controls on the displ…
How to Set the Time on a Volkswagen Passat
How to Set the Time on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Below are the instructions to adjust the time on the display and clock of the Volkswagen Passat dashboard. First, get into the car and turn on the ig…
How to Check and Reset the AdBlue Level on the Volkswagen Passat
How to Check and Reset the AdBlue Level on the Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) The instructions in this guide will allow you to check the AdBlue level and reset the warning on the Volkswagen Passat. Get into the vehicle and star…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos