Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Engine oil

The first step is to remove the plastic cover from the engine. Using the appropriate key with a hook, gently unscrew the oil filter and extract the cartridge from its housing. Lift the vehicle and place a plastic sheet and a container under the engine to collect the oil. Unscrew the oil drain plug on the sump and allow the oil to drain out. Replace the oil drain plug, refit the oil filter, and top up with new oil. Start the engine and check for proper operation. Do not dispose of used oil in the environment; take it to designated collection centres.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Replacing the Engine Oil Level Sensor on a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this brief guide, you will learn how to remove and replace the engine oil level sensor on a Volkswagen Golf. First, place the motorcycle on a stan…
How to replace the oil filter, engine oil, and air filter of the VW Golf 7
How to replace the oil filter, engine oil, and air filter of the VW Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps that make up the basic car service on a Volkswagen Golf 7 are quite simple to perform independently. The first step to be carried out is to…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Lifting the vehicle on a ramp makes it easier to drain the oil and remove the filter, which is located just above the sump at the front of the engine…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What is the right amount of engine oil for the Volkswagen Golf 7 1.6 TDI? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos