Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Cooling System Flange

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Antifreeze coolant

See other generations:
Video tutorial

Open the front bonnet and locate the cooling system flange: it is situated on the right side of the engine block (when viewed from the front) and is connected to several hoses and sensors. During disassembly, coolant will spill out: it is recommended to perform this repair with the engine cold.

Disconnect the hoses connected to the flange and the sensors (remove the locking pin); then unscrew the flange's fastening bolts and remove it from its seat; fit the new one by tightening the bolts and reconnecting the sensors and hoses; restore the coolant level.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief and simple guide, you will learn how to drain and refill the coolant for the Volkswagen Jetta. First, raise the vehicle and disconnect …
Volkswagen Jetta (2010-2018 / MK 6, A6) This procedure will show you how to replace the engine coolant in the Volkswagen Jetta 2.5. First, open the bonnet and unscrew the cap of the coolant…
Volkswagen Jetta (2005-2010 / MK 5, A5) In this video tutorial, you will see how to dismantle and replace the engine cooling radiator in a Volkswagen Jetta, as well as in a Golf. First, ope…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos