Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cooling liquid of the Volkswagen Jetta 2.5

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Antifreeze coolant

Today's procedure will show us how to replace the engine coolant in the Volkswagen Jetta 2.5. First, we open the hood and unscrew the cap of the coolant reservoir; then we lift the car and unscrew the drain plug of the antifreeze, letting it drain into a container for about ten minutes, as shown in the video. At this point, we top up with the new antifreeze, of the right type and suitable for our radiator; we fill the fluid reservoir until it reaches the maximum level mark!

Posted on 30 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Coolant Replacement for the Volkswagen Jetta
Coolant Replacement for the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) In this brief and simple guide, you will learn how to drain and refill the coolant for the Volkswagen Jetta. First, raise the vehicle and disconnect …
Replacement of the cabin heater radiator of the Volkswagen Jetta
Replacement of the cabin heater radiator of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today we will discover information on how to disassemble and replace the cabin heater radiator of the Volkswagen Jetta. First, we open the front door…
How to Replace the Coolant in the Volkswagen Jetta - Golf - Bora
How to Replace the Coolant in the Volkswagen Jetta - Golf - Bora
Volkswagen Jetta (1998-2005 / A4, MK 4) Below are the instructions on how to bleed and top up the coolant in the Volkswagen Jetta, as well as the Golf and Bora. First, raise the vehicle and…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos