Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Coolant Replacement for the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Antifreeze coolant

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to drain and refill the coolant for the Volkswagen Jetta. First, raise the vehicle and disconnect the coolant hose connected to the radiator, allowing the fluid to drain into a container for about ten minutes; then open the bonnet and unscrew the cap of the coolant reservoir.

Now, refill with the new coolant suitable for your radiator, filling the reservoir until it reaches the maximum level mark!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Replacing the Coolant in the Volkswagen Jetta 2.5
Replacing the Coolant in the Volkswagen Jetta 2.5
Volkswagen Jetta (2010-2018 / MK 6, A6) This procedure will show you how to replace the engine coolant in the Volkswagen Jetta 2.5. First, open the bonnet and unscrew the cap of the coolant…
How to Replace the Coolant in the Volkswagen Jetta - Golf - Bora
How to Replace the Coolant in the Volkswagen Jetta - Golf - Bora
Volkswagen Jetta (1998-2005 / A4, MK 4) Below are the instructions on how to bleed and top up the coolant in the Volkswagen Jetta, as well as the Golf and Bora. First, raise the vehicle and…
Replacing the Coolant Reservoir on the Volkswagen Jetta
Replacing the Coolant Reservoir on the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Today, you will see in this video tutorial how to remove and replace the coolant reservoir on the Volkswagen Jetta. First, open the bonnet and start …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos