Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external lock of a 2011 Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door lock

See other generations:
Video tutorial

This guide shows how to remove the external door handle of the Volkswagen Polo. As the first step, using the ignition key, lever off the lock cover to remove it. Using a flathead screwdriver from inside the door, remove the rubber cap covering the lock screw and the adhesive nearby.

Using a Torx20, unscrew the exposed screw.

Insert the key into the lock and turn it to the right to loosen the second screw (the one under the adhesive); once loosened enough, you can remove the lock cylinder. Pull the handle as if you want to open the door; at this point, it is completely free and can be replaced.

Reassembly is the same as the procedure just performed. At the end of the operation, check the proper functioning of the lock.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Removing the Lock and Door Handle of the Volkswagen Polo
Removing the Lock and Door Handle of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow these steps to remove and replace the lock and external handle of the front door of the Volkswagen Polo. First, open the front door and start …
Replacing the lock cylinder on a Volkswagen Polo
Replacing the lock cylinder on a Volkswagen Polo
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Today, we will discover the main steps to remove and replace the lock cylinder and the external handle on a Volkswagen Polo. First, open the front do…
How to Replace the External Handle of the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To replace the external handle of the Volkswagen Polo, open the door to access the screws on the side near the lock. Once these screws are removed, u…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos