Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Fuses on a VW Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Fuse box

Learn how to replace the fuses located in the dashboard of the VW Polo. Use a plastic lever to remove the covering in the dashboard (driver's side), then remove the damaged fuses: use needle-nose pliers to pull out the damaged fuses from the compartment. After this operation, insert the new fuses into the appropriate slots in the compartment. Turn on the ignition and check the functioning of the electrical components. Replace any damaged fuses found in the fuse box with equivalent type and size.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The fuses in the Volkswagen Polo are located within two fuse boxes inside the car. The first is positioned immediately beneath the steering column, b…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this short guide, we will see how to find the configuration of the internal fuse box of the Volkswagen Polo, identifying its location. First, open…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - What is the location of the power steering fuse on the Volkswagen Polo? Read answer
    • Polo 2009-2017 - Where is the wiper fuse located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Where is the Volkswagen Polo wiper relay located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos