Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Bonnet Strut on a Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Body

See other generations:
Video tutorial

Before starting, open the bonnet of your Volkswagen Passat. Begin by unfastening and removing the two clips that secure the strut to the bonnet and the base, using a flathead screwdriver to pry them off. Next, dislodge and extract the strut from its housing.

By doing this, you will have freed the strut itself. At this point, you can remove the bonnet strut from your Volkswagen Passat.

Once you have completed this step, the disassembly will be finished, and you will be free to install the new strut.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) The steps outlined in this guide will show you how to remove and replace the hydraulic struts of the rear hatch on a Volkswagen Passat. First, open t…
Volkswagen Passat (2005-2010 / B6, 3C) Is the bonnet gas strut damaged? Let's see how to replace it from inside the engine bay of a Passat. Lift the bonnet and secure it with a prop to rep…
Volkswagen Passat (1996-2005 / 3BG, B5) If the front bonnet struggles to stay open, it means the gas strut (often referred to as a hydraulic piston) is damaged and can no longer support the…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos