Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Handbrake Cable Replacement on the Volkswagen Golf MK4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Parking brake

See other generations:
Video tutorial

In today's video tutorial, we will see the main instructions for disassembling and replacing the handbrake cable on the fourth series Volkswagen Golf. First, lift the vehicle and disconnect the handbrake cable from the rear brakes by unscrewing the adjuster screws; then detach the cable from the retaining bushes of the sleeves.

Next, get inside the vehicle and remove the centre tunnel; then disconnect the cables from the handbrake lever adjuster.

Finally, remove the entire cable and replace it with the new one, following the video to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Adjusting the Handbrake on the Volkswagen Golf MK4 - Bora
Adjusting the Handbrake on the Volkswagen Golf MK4 - Bora
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, follow the steps to adjust the handbrake on the fourth-generation Volkswagen Golf and the Bora. First, get inside the vehicle and remo…
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Guide to Replacing the Handbrake Cable of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to dismantle and replace the handbrake cable of the Volkswagen Golf. First, get inside t…
How to Adjust the Handbrake Cable on a Volkswagen Golf MK5
How to Adjust the Handbrake Cable on a Volkswagen Golf MK5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this short video, we will cover the main instructions for adjusting the handbrake cable on the fifth series Volkswagen Golf, in GTI version. First…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos