Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake Cable on a Volkswagen Golf MK5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this short video, we will cover the main instructions for adjusting the handbrake cable on the fifth series Volkswagen Golf, in GTI version. First, get into the vehicle and start by removing the centre tunnel to access the handbrake cable adjuster; to remove the tunnel, take off the armrest and unclip the plastics, as shown in the video. At this point, use a spanner to tighten or loosen the adjuster nut to adjust the handbrake cable; make several tests until you achieve the optimal lever travel!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To adjust the handbrake on a Volkswagen Golf, loosen the screws that secure the plastic cover of the centre tunnel. Once these three screws are loose…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today we will discover the instructions that will allow us to disassemble and replace the handbrake cable of the Volkswagen Golf. First, we get into …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Follow this guide to remove and replace the handbrake cable on your Volkswagen Golf in simple, quick steps. First, get into the vehicle from the rear…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos