Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the handbrake cable of the Volkswagen Golf

Model: Volkswagen Golf Golf 1, MK 1 - Years 1974-1983
Part: Parking brake

In these brief steps, we will see the institutions that will allow us to dismantle and replace the handbrake cable of the Volkswagen Golf. First, we get on board the car and start dismantling the handbrake lever cover, thus accessing the cable; then we disconnect the cable by unscrewing the adjustment screw, as shown in the video. At this point, we raise the car and proceed to dismantle the brake drum, disconnecting the wiring from the braking system; we install and pass the new handbrake cable, finally checking the wear of the rear brake shoes, reassembling everything!

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Handbrake Cable on a Volkswagen Golf
How to Replace the Handbrake Cable on a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Follow this guide to remove and replace the handbrake cable on your Volkswagen Golf in simple, quick steps. First, get into the vehicle from the rear…
Guide to replacing the handbrake cable of the Volkswagen Golf
Guide to replacing the handbrake cable of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today we will discover the instructions that will allow us to disassemble and replace the handbrake cable of the Volkswagen Golf. First, we get into …
Handbrake Cable Replacement on the Volkswagen Golf MK4
Handbrake Cable Replacement on the Volkswagen Golf MK4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In today's video tutorial, we will see the main instructions for disassembling and replacing the handbrake cable on the fourth series Volkswagen Golf…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos