Do it yourself
Frequently asked questions about cars and motorcycles

Adjusting the Handbrake on the Volkswagen Golf MK4 - Bora

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

In this video, follow the steps to adjust the handbrake on the fourth-generation Volkswagen Golf and the Bora. First, get inside the vehicle and remove the centre console from the rear; then access the handbrake cable adjuster, as shown in the video. At this point, adjust the setting screw by tightening or loosening it based on the handbrake travel; perform several tests until you achieve the desired result. Finally, reassemble the centre console!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In today's video tutorial, we will see the main instructions for disassembling and replacing the handbrake cable on the fourth series Volkswagen Golf…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To adjust the handbrake on the Volkswagen Golf, loosen the screws securing the central tunnel cover. Once the screws are loosened, you can completely…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today we will discover the instructions that will allow us to disassemble and replace the handbrake cable of the Volkswagen Golf. First, we get into …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos