Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rear-View Mirror of the Volkswagen Golf - Bora - Jetta

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Side mirror

Discover the procedure to remove and replace the external rear-view mirror of the Volkswagen Golf, as well as the Bora and Jetta. First, open the front door and start by removing the door panel and the triangular plastic cover located behind the mirror; then unscrew the fixing screws located behind the mirror, disconnecting the electrical connector for the glass adjustment, as shown in the video. Now, pull the mirror out from the outside, replacing it with the new one!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Removing the Ignition Barrel on the Volkswagen Golf 4 - Bora - Jetta
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. fourth-generation Volkswagen Golf, as well as the Jetta and Bora of the same generation. First, get inside the vehicle and insert the key into the barrel;.. …
How to Change the Gear Knob on the Volkswagen Golf - Jetta - Bora
How to Change the Gear Knob on the Volkswagen Golf - Jetta - Bora
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. knob on the Volkswagen Golf, as well as on the Jetta and Bora. First, get inside the vehicle and start by removing the gaiter from the base of the.. …
Removing the Central Locking Module on the Volkswagen Golf - Bora MK4
Removing the Central Locking Module on the Volkswagen Golf - Bora MK4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. fourth series Volkswagen Golf, as well as on the Bora and Jetta. First, open the front door and start by removing the door panel; to do this, unscrew.. …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos