Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : Removing the starter motor on the Volkswagen Touareg 3.0 TDI V6

Volkswagen Touareg - Video tutorial

Model: Volkswagen Touareg 7L, MK 1 - Years 2002-2010
Part: Starter motor
Operation: Removing the starter motor on the Volkswagen Touareg 3.0 TDI V6

In today's video we will find out how to remove and replace the starter motor on the first generation Volkswagen Touareg, with 3.0 TDI V6 engine. First we are going to remove the upper engine protection; we find the starter motor on the lower left side. At this point we remove the air filter box cover and the two lower aluminum sleeves, as shown in the video. Now we first disconnect the battery and lift the car to unscrew the starter motor screws, disconnecting the electrical connector; follow the video to the end for replacement!


Posted on 27 February 2024 by ScegliAuto



How to replace the starter motor of the Volkswagen Touareg 2.5 TDI
Volkswagen Touareg (2002-2010 / 7L, MK 1) In this guide, let's discover the instructions that will allow us to disassemble and replace the starter motor of the Volkswagen Touareg 2.5 TDI. Fir
How to replace the starter motor of the Volkswagen Touareg V10.
Volkswagen Touareg (2002-2010 / 7L, MK 1) Today's instructions will illustrate the main steps useful for disassembling and replacing the starter motor of the Volkswagen Touareg V10. First, we
How to replace the starter motor of the Volkswagen Touareg V8.
Volkswagen Touareg (2002-2010 / 7L, MK 1) Let's see the steps that will allow us to disassemble and replace the starter motor of the Volkswagen Touareg, with a V8 engine. First, we lift the v

Other guides that may interest you

    Frequently Asked Questions

    • Touareg 2002-2010 - Where is the starter motor on the Volkswagen Touareg located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos