Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : POLO MK6 headlight bulb replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Headlight
Operation: POLO MK6 headlight bulb replacement

To disassemble the light, it will be necessary to unscrew the three screws above with the help of a screwdriver, then the light will be held by two plastic joints placed under the light. When you remove the headlight, do it gently and maybe cover the plastic parts with tape to avoid scratching the paint. Then detach the connector at the back, which is held by a plastic clip. Then remove the rubber insert cover and carefully remove the old bulb. When inserting the new one, make sure it fits properly and cover the hole with the rubber insert. Replace the headlight and replace the screws.


Posted on 8 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos