Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo 6, MK VI, AW1, MK 6, Polo VI
- Years 2017-2024 In this video, we can see that when the low beam headlight bulb of the Volkswagen Polo burns out, it is good practice to replace it as soon as possible for our safety and to avoid a fine. To change it, we open the hood, position ourselves in front of the headlight containing the bulb to be replaced, use a torx screwdriver to unscrew the two upper screws that hold the headlight in place, slide it outwards. Remove the rubber protection on the back of the bulb, disconnect the connector, release the metal clip and remove the old bulb, replacing it with a new H7 bulb. Reattach the metal clip, connect the connector, reattach the protection, insert the headlight back into its slot and secure it with its screws.
Posted on 28 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |