Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlining from a Volkswagen Golf 6?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the headlining from the Volkswagen Golf, loosen the screws securing the courtesy light unit and remove it. Next, unscrew the handles by removing the appropriate screws and detach the headlining from the inside of the door pillars. After freeing the piece, you can extract it by opening the boot lid. At this point, install the new headlining, which should be secured with the relevant screws, and reinstall all previously removed parts.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlining on a Volkswagen Golf 5?
How to Replace the Headlining on a Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In the Volkswagen Golf 5, it is quite common for the headlining to detach, ruining the aesthetics. Replacement is possible as a DIY task without goin…
How to Replace the Headlining on the Volkswagen Golf?
How to Replace the Headlining on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the headlining on the Volkswagen Golf, first detach all the trim pieces along the door pillars and the rear window: then proceed to remove…
How to Replace the Headlining on a Volkswagen Golf?
How to Replace the Headlining on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The procedure for replacing the headlining on a Volkswagen Golf involves removing all components that obstruct the removal of the interior ceiling co…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos