|
Do it yourself
| |||
| ||||
How to Reset the Service Light on a Volkswagen Golf 6
Model: Volkswagen Golf
Golf 6, MK 6, 5K1, Golf VI
- Years:
2008, 2009, 2010, 2011, 2012
Video tutorial
This guide shows two possible ways to reset the service light on the vehicle. The first procedure allows the operation via the onboard menu. First, close all doors and turn on the instrument panel. Press and hold the "trip" button on the wiper stalk until the menu appears on the instrument display. Navigate to the "settings" option and press the "ok" button. Move to the "service" option and press "ok" again, then select the "reset" option; press the "ok" button again to confirm the reset of the warning. The other procedure uses two buttons. First, press and hold the "0.0/SET" button (to the right of the dashboard) and then turn on the instrument panel. At this point, release the button while holding down the button on the left of the dashboard for twenty seconds. The reset operation is now complete.
Updated on 1 May 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2019-2026 /
MK 8, Golf 8, Golf Viii)
These short and simple steps will allow us to reset the service reminder (oil change) of the Volkswagen Golf. First, we get on board the car and star…
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
To reset the Service light on a Volkswagen Golf, press and hold the right button located at the bottom of the instrument cluster. While holding it, t…
Volkswagen Golf
(2019-2026 /
MK 8, Golf 8, Golf Viii)
To reset the Service light shown on the instrument panel of the Volkswagen Golf 8, you will need to turn on the ignition by inserting the ignition ke…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Bonnet of a Toyota C-HR
To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |