Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

To carry out this operation safely, disconnect the battery. Start by inserting the tip of a small flathead screwdriver into the slot at the bottom of the radio frame and lever it out. This will release the lower clips of the cover.

To completely remove the cover, gently pull it off with your hands. Once the cover is removed, you will see the screws that secure the radio.

Proceed to unscrew and remove these screws. This will free the radio, allowing you to extract it from its housing.

Once extracted, to fully disassemble it, simply disconnect the rear connector. When you have disconnected the connector, you will have successfully completed the disassembly.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio on VW Polo
How to Remove the Car Radio on VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Replace the damaged car radio on a Volkswagen Polo if it is broken or outdated. Let's see how to remove it. Insert the keys into the sides of the pla…
How to Remove the Radio from a Volkswagen Polo
How to Remove the Radio from a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How do you remove the radio from a Volkswagen Polo? Watch this video carefully to see how to proceed with the removal. Using a plastic or metal spatu…
Removing the Original Radio from a Volkswagen Polo
Removing the Original Radio from a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) How to remove the original radio from a Volkswagen Polo? Let's carefully see in this video how to perform the disassembly by following the guidelines…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos