Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to replace the arrow on the exterior mirror in the Volkswagen Golf 6

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf MK 6, Golf VI, 5K1, Golf 6 - Years 2008-2012
Part: Outside rearview mirror
Operation: How to replace the arrow on the exterior mirror in the Volkswagen Golf 6

Replacing the direction indicator located under the exterior rearview mirror of your Volkswagen Golf Mk6 is one of the quickest and simplest operations that can be carried out in total autonomy. If you don't know how to do it, don't worry because the following mini guide comes to your aid. First, get yourself an object thin enough to slide into the present slot. Remove the external plastic cover, unscrew the screws present and unclip the lower part by acting on the pins. At this point, remove the old arrow and replace it with a perfectly compatible new one. Finally, reassemble all the various components correctly.


Posted on 15 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 2012-2019 - Why don't the Volkswagen Golf 7 mirrors close? Read Answer
    • Golf 2012-2019 - How to replace the glass in the exterior mirror in the Volkswagen Golf? Read Answer
    • Golf 2012-2019 - How much does a Golf 7 outside rearview mirror cost? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos