Do it yourself
| ||||
|
Volkswagen Amarok - Video tutorial
Model: Volkswagen Amarok
MK 1
- Years 2010-2021 In today's video tutorial we will see how to disassemble and replace the pulley of the air conditioning compressor of the Volkswagen Amarok 2.0. First we are going to disassemble the air conditioning compressor from our car, removing the serpentine belt and unscrewing the fixing screws of the compressor; then disconnect the electrical connector. At this point we are going to remove the cap of the pulley and unscrew the central nut of the same, using two wrenches, as shown in the video; now we replace the pulley and bearing with new ones, following the video to the end!
Posted on 18 April 2024 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |