Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Central Locking Mechanism on a Volkswagen Golf - Jetta

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Door lock

See other generations:
Video tutorial

In today's video, you will see the main steps to remove and replace the central locking mechanism on a Volkswagen Golf, as well as on a Jetta. First, open the front door of your car and start by removing the door panel.

To do this, remove the window switch panel and unscrew the screws located on the panel, as shown in the video. At this point, unscrew the screws of the central locking module, disconnect the electrical connector to remove it, and replace it with the new one; then reassemble everything!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Where is the central locking fuse located in the Volkswagen Golf?
Where is the central locking fuse located in the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The central locking fuse for the Volkswagen Golf is located in the fuse box on the left side of the dashboard: to access it, remove the protective co…
How to Dismantle the Central Locking of the Volkswagen Golf
How to Dismantle the Central Locking of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The following instructions will allow you to dismantle and replace the central locking of the Volkswagen Golf. First, open the driver’s side front do…
How to Reset the Central Locking of the Volkswagen Golf 4?
How to Reset the Central Locking of the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos