Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Volkswagen Touareg?

Model: Volkswagen Touareg CR, MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

If the remote key for the vehicle no longer opens it, you need to replace it by following the instructions below: first, press on the "W" logo with a finger and extract the emergency key, then use a sharp object to pry at the back to release the aluminium-coloured side profiles.

At this point, under one of the two profiles, there is the battery compartment, and to open it, pry outward with a sharp object.

Then remove the old battery and insert the new one (model CR2032). Finally, reassemble the components in sequence.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Volkswagen Touareg
How to Replace the Key Battery on a Volkswagen Touareg
Volkswagen Touareg (2017-2024 / ) Start by inserting the tip of a thin but sturdy tool into the slot between the cover and the body of the key fob for your Volkswagen Touareg, then le…
How to Replace the Key Battery in the 2020 Volkswagen Touareg?
How to Replace the Key Battery in the 2020 Volkswagen Touareg?
Volkswagen Touareg (2018-2026 / CR, MK 3) This video shows how to replace the battery in a remote key for the 2020 Volkswagen Touareg. The same procedure can be used for other keys from the V…
How to replace the key fob battery of the Volkswagen Touareg
How to replace the key fob battery of the Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) In this guide, you will find instructions to disassemble and replace the battery of the key fob for the Volkswagen Touareg. First, take the key fob i…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos