Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Steering Wheel Cover for the Volkswagen Golf 7 Jetta

Model: Volkswagen Jetta A7, MK 7 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Steering wheel

See other generations:
Video tutorial

This video shows you how to install the steering wheel cover for the Volkswagen Golf 7 Jetta. To begin, take the steering wheel cover and position it as shown in the video.

Next, wrap the cover around the steering wheel, threading the sleeve in the same position as seen in the video. Applying slight pressure to the return points, start tightening the sleeve around the steering wheel.

Pay attention to the loops along the sleeve to ensure they fit exactly into the designated spaces. Now, using a combination of pressure and adherence, begin sewing around the entire perimeter of the steering wheel cover as shown in the video.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Conditioning Compressor from a Volkswagen Jetta
How to Remove the Air Conditioning Compressor from a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) This guide provides instructions on how to remove and replace the air conditioning compressor of the Volkswagen Jetta, as well as the Golf. First, op…
How to Replace the Window Switch Buttons on the Volkswagen Jetta - Golf
How to Replace the Window Switch Buttons on the Volkswagen Jetta - Golf
Volkswagen Jetta (2005-2010 / MK 5, A5) The steps outlined in this guide will show you how to remove and replace the window switch panel of the Volkswagen Jetta, as well as the Golf. First,…
How to Replace the Crankshaft Position Sensor of the Volkswagen Jetta 1.9 TDI
How to Replace the Crankshaft Position Sensor of the Volkswagen Jetta 1.9 TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) In this brief guide, follow the main instructions to remove and replace the crankshaft position sensor of the Volkswagen Jetta 1.9 TDI, as well as th…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos