Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Car door

If you need to remove the door panel on this vehicle, the instructions provided below and the attached video tutorial will be helpful. Use a plastic trim tool to detach and remove the trim around the door handle. Underneath the trim, there are two screws that need to be removed, along with another screw located at the bottom of the panel. At this point, carefully detach all the clips around the panel to avoid breaking them, and then gently lift the panel to fully disengage it. Finally, take care to disconnect the connectors and electrical terminals located behind.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Volkswagen Polo
How to Remove the Door Panel of a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you start, open the door of your Volkswagen Polo. Begin by unfastening and removing the window switch panel from its housing in the door, then…
How to Remove the Rear Door Panel of a Volkswagen Polo
How to Remove the Rear Door Panel of a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you start, open the rear door of your Volkswagen Polo. Begin by removing the window lift handle by prising it off. Next, using a small flathea…
How to Remove the Door Panel from a Volkswagen Polo
How to Remove the Door Panel from a Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Before you begin, open the door of your Volkswagen Polo. Start by unclipping and removing the cover of the internal handle of the door panel, using a…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos