Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Transporter
    4. : How do you replace the spark plugs on the Volkswagen Transporter?

Volkswagen Transporter - Video tutorial

Model: Volkswagen Transporter T4, MK 4 - Years 1990-2003
Part: Spark plugs
Operation: How do you replace the spark plugs on the Volkswagen Transporter?

In order to replace the spark plugs of the Volkswagen Transporter you have to open the hood, so that you can then unscrew the screws that secure the front bumper of the vehicle. This will have to be unscrewed in order to allow easier access to the upper part of the engine block: here you will have to disconnect the coils connected to the injectors, which can now be extracted to give access to the spark plugs below. Now the old spark plugs can be removed from their housing, so that the new ones can be inserted by fitting all the parts removed previously.


Posted on 16 May 2024 by ScegliAuto



Cylinder compression check instructions
Volkswagen Transporter (1990-2003 / T4, MK 4) To check the condition of the piston seals and therefore the compression of the cylinders, the special pressure gauge must be connected to the spark
How to disassemble the car radio from Volkswagen Transporter T6?
Volkswagen Transporter (2014-2024 / T6, MK 6) To disassemble the Volkswagen Transporter T6 car radio, all we have to do is follow the instructions in the video and shown below. 1) Make sure you h
Where is and how to reach the fuse box of a Volkswagen Transporter?
Volkswagen Transporter (2014-2024 / T6, MK 6) Good morning, today we are here to discover where the fuse box of our Volkswagen Transporter T6 is located and how to reach it. Let's start by pullin

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos