Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Volkswagen Passat FSI water pump and timing belt replacement

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Pump
Operation: Volkswagen Passat FSI water pump and timing belt replacement

Let's see in this guide the instructions that will allow us to remove and replace the timing belt and the water pump of the Volkswagen Passat FSI. First we lift the car and start removing the right front wheel; then we open the bonnet to unscrew the engine support bolts, lifting the engine from underneath with a jack. At this point we remove the timing cover to access the belt; we disconnect the various pipes and unscrew the fixing screws to remove and replace the water pump, following the video tutorial to the end!


Posted on 18 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Passat 2010-2014 - What problems does the oil pump of the Volkswagen Passat 2.0 TDi present? Read Answer
    • Passat 2005-2010 - How much does it cost to replace the water pump in Volkswagen Passat? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos