Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door of the Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Car door

See other generations:
Video tutorial

In this video tutorial, you can see how to remove the front door of the Volkswagen Golf 6. The first step, once the door is open, is to take a small flathead screwdriver and start prying off the plastic cover of the handle. Then, use a larger screwdriver.

Once this cover is removed, take a Torx key and remove the three Torx screws inside. After removing the three screws located under the plastic cover, there is another screw under the panel that should also be removed with the same key. Once all screws are removed, use the screwdriver to lever from underneath the panel and disengage all the clips.

After all clips are released, pull the panel upwards to remove it. Disconnect the cables, and you're done.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door of a Volkswagen Golf
How to Remove the Front Door of a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To completely remove the front door of a Volkswagen Golf, open the door so that the connectors near the door hinges can be disconnected. Once these a…
How to Adjust the Front Door of the Volkswagen Golf
How to Adjust the Front Door of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Briefly see the steps and moves that will allow you to adjust the front door of the Volkswagen Golf. First, open the front door of the vehicle and st…
How to Remove the Front Door of the Volkswagen Golf
How to Remove the Front Door of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Watch this video to learn how to remove the front door, as well as all the other doors of the Volkswagen Golf, by following these simple steps. In th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos