Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the centre panel of the Volkswagen Passat dashboard?

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: A/C controls

To remove the centre panel of the Volkswagen Passat dashboard, use a lever tool to lift the cover that encloses the radio and then the climate control commands. This will allow you to unscrew the 20 Torx screws that secure the panel in its housing. By doing this, you can pull out the climate control commands and disconnect the connectors located at the back. Once the old panel has been removed, you can insert a new one, which should be secured with screws and covered with its trims.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the central tunnel of the Volkswagen Passat?
How do you remove the central tunnel of the Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In order to remove the central tunnel of the Volkswagen Passat, you need to pry with an object to detach the shift lever cover and also the climate c…
How to Remove the Inner Panel of the Tailgate on the Volkswagen Passat?
How to Remove the Inner Panel of the Tailgate on the Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) To remove the inner trim of the tailgate on the Volkswagen Passat, open the tailgate to access the inner trim. This can be removed by pulling out the…
How do you remove the door panel of the Volkswagen Passat?
How do you remove the door panel of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) In order to remove the door panel of the Volkswagen Passat, you need to pry it off with an object to detach the handrail trim: this will give access …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos