Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Hood Cover on a Volkswagen Golf 3 Cabriolet

Model: Volkswagen Golf Golf III, MK 3, Golf 3 - Years 1991-1997
Part: Convertible top

In this video, learn how to disassemble and replace the hood cover on a third-generation Volkswagen Golf Cabriolet, following the instructions below. First, open the boot and begin unscrewing all the screws securing the internal trims of the hood, removing the side pillars; then remove the clips of the hood cover to finally detach it from the frame, as shown in the video. At this point, replace it with the new one and secure it properly to the frame using screws and hooks; follow the video tutorial to the end!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) In order to replace the convertible top of the Volkswagen Golf Cabrio, you need to open the rear hatch so that you can locate the screws that secure …
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) On the Golf Cabrio III, the lighting of the climate control panel can become dim or completely fail. The most common cause is a burnt-out bulb, but t…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos