Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Upgrade the Radio in a Volkswagen Tiguan with Bluetooth Connection

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

To remove the radio from a Volkswagen Tiguan, use a screwdriver to take off the upper left grille and the passenger airbag module. Disconnect the connector - remember not to turn on the ignition - then remove the outer trim.

At this point, you can remove the 4 screws securing the radio and pull it out of its housing. Disconnect the rear connector.

Attach the Bluetooth antenna to the central screw, allowing it to hang in the compartment. Now, you can screw the radio back in, reposition the trim, reconnect the airbag connector, and replace the grille.

The job is complete. You now have Bluetooth connectivity on your radio.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Connect Your Smartphone via Bluetooth in a Volkswagen Tiguan
How to Connect Your Smartphone via Bluetooth in a Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Thanks to Bluetooth technology, your Volkswagen Tiguan can connect to your smartphone, allowing you to manage multimedia files and calls directly fro…
How to turn on the Bluetooth of the VW RCD 310 radio in the VW Tiguan
How to turn on the Bluetooth of the VW RCD 310 radio in the VW Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Turning on Bluetooth on a Volkswagen Tiguan is a simple and quick operation to be carried out independently. To turn on the car's Bluetooth, we need …
How to activate Bluetooth in the Volkswagen Tiguan?
How to activate Bluetooth in the Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To activate the Bluetooth in the Volkswagen Tiguan, turn on the instrument cluster and navigate through the menu that appears using the controls on t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos