Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery in your vehicle because it has run flat, the following text and video will provide all the useful instructions and steps for safely completing the replacement. After lifting the bonnet, you will find the battery on the left side.

Remove the rubber cover and disconnect the negative terminal first, followed by the positive. Then, unscrew the fixing bolts of the lower support plate.

Remove the battery from the compartment and replace it with the new one, then refit the lower plate and reconnect the positive terminal first, followed by the negative.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to open the Volkswagen New Beetle with a flat battery
Volkswagen New Beetle (2011-2018 / MK 3) In this tutorial, you will learn how to open the vehicle with a flat remote battery on the Volkswagen New Beetle third generation, as well as on most…
How to Replace the Remote Battery of the Volkswagen New Beetle?
How to Replace the Remote Battery of the Volkswagen New Beetle?
Volkswagen New Beetle (2011-2018 / MK 3) In this video, you will see how to replace the remote battery of the Volkswagen New Beetle. This is a very simple and quick operation. You only need …
How to Remove and Replace the Battery of the Volkswagen New Beetle
How to Remove and Replace the Battery of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Below are the instructions to remove and replace the battery of the Volkswagen New Beetle. First, open the vehicle's engine bonnet and start by remov…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos