Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter and Engine Oil in a Volkswagen Sharan

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, see how to replace the oil filter and engine oil in a Volkswagen Sharan: the first step is to lift the bonnet and secure it with the appropriate prop. Next, remove the engine cover from its location; use a suitable socket to unscrew the oil filter, place the old filter in a container, and replace the cartridge seals.

Position the new filter in the cartridge and screw the new filter into place. Lift the car with a hydraulic lift and place a container under the oil sump to collect the used oil. Unscrew the drain plug with a 19mm socket and wait for all the oil to drain into the container; re-screw the oil drain plug and lower the vehicle.

Using a funnel, top up the oil, approximately 5 litres (refer to the vehicle's user and maintenance manual).


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a Volkswagen Sharan?
How to Reset the Oil Service Light on a Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) In this tutorial, we will see how to reset the oil service light on a Volkswagen Sharan, a very simple and quick operation to perform only after comp…
How to Reset the Oil Service on a Volkswagen Sharan?
How to Reset the Oil Service on a Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) Resetting the oil service on a Volkswagen Sharan is a very simple and quick operation; let's see how to proceed in this tutorial. Before doing this, …
Resetting the Oil Change Light on Volkswagen Sharan
Resetting the Oil Change Light on Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) This very short video tutorial shows how to reset the oil change light on a Volkswagen Sharan, specifically produced from 2004 to 2010. This is a ver…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos