Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Brake Disc and Pad Replacement

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake pads

See other generations:
Video tutorial

Lift and position the vehicle on suitable axle stands, apply a wedge to the rear wheel for safety, and remove the front wheels; disconnect the brake wear sensor connector and proceed to remove the caliper; extract the worn pads and detach the brake caliper bracket; then unscrew the disc fixing bolt from the hub and remove it from its seat; before installing the new disc, clean the hub seat with a wire brush, apply grease, clean the new disc of protective oil residue, and secure it to the hub with the respective fixing bolt; reattach the caliper bracket, insert the new pads, retract the piston using the appropriate tool, and reposition the caliper.

Repeat the procedure on the other wheel and pay attention during the first braking.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacement of Brake Disc and Pads
Replacement of Brake Disc and Pads
Volkswagen Sharan (1995-2010 / 7M, MK 1) Place your vehicle on axle stands and remove the relevant wheels. To perform this task, you will need to equip yourself with an electronic tool that …
How to remove the front seat from the Volkswagen Sharan?
How to remove the front seat from the Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) To remove the front seat from the Volkswagen Sharan, loosen the screws that secure the seat to its base. These screws are located at the front and re…
How to Remove the Front Seat of a Volkswagen Sharan
How to Remove the Front Seat of a Volkswagen Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) Remove the front seat from a Volkswagen Sharan. Move the seat up, then use a socket spanner to undo the securing bolts on the rear rail. Slide the se…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos