Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter in a Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, we can see how to replace the cabin filter in a Volkswagen New Beetle by following a few simple steps: the first thing to do is to purchase a new cabin filter from an authorised dealer; the next step is to get inside the vehicle, turn off the engine, and pull the handbrake.

The cabin filter in this vehicle can be found inside, under the windscreen; remove the upper panel by applying slight pressure; using a T20 Torx spanner, remove the six screws of the lower panel; once the six screws are unscrewed, remove the panel and you will find the old filter element underneath; remove the old filter and clean the housing thoroughly.

Position the new filter according to the airflow direction; reposition the previously removed panels.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Volkswagen New Beetle (2011-2018 / MK 3) The legendary Beetle, the most well-known German car in the world, has made way for the new New Beetle. Let’s see how to change the cabin air filter …
Volkswagen New Beetle (1999-2012 / 9C, MK 2) The cabin air filter of the Volkswagen New Beetle is located inside the cabin, specifically within the upper dashboard. To replace the filter, it is …
Volkswagen New Beetle (2011-2018 / MK 3) In this new guide, we will assist you in replacing the cabin air filter in your 2015 Volkswagen Beetle. This is a relatively simple operation, and wi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos