Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car's Rear-View Mirror

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Side mirror

Changing the rear-view mirror of your car is a fairly simple operation even if you are not a mechanic or bodywork specialist; you just need a bit of patience, a screwdriver, and some Torx keys. Carefully remove the protective panel inside the car where the retaining screws will be located underneath. The panel is clipped in place. Once the old mirror is removed, you can proceed to insert the new one, ensuring it is correctly positioned in its seat, checking that the car's seal perfectly covers the sides of the mirror.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the External Rear-View Mirror
Instructions for Removing the External Rear-View Mirror
Volkswagen Sharan (1995-2010 / MK 1, 7M) .. To remove the external rear-view mirror, you first need to take off the door panel: start by unscrewing the screws along the bottom.. …
How to remove the headlining from the Volkswagen Sharan?
How to remove the headlining from the Volkswagen Sharan?
Volkswagen Sharan (1995-2010 / MK 1, 7M) .. courtesy light. Then, detach the interior rear-view mirror and the trims of the door pillars: this will allow you to leverage and detach the headlining.. …
How to Remove the Rear Bumper of a Sharan
How to Remove the Rear Bumper of a Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) Do you want to remove the rear bumper of your Volkswagen? Follow this guide to proceed. First, open the tailgate of the boot, then access the inspect…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos