|
Do it yourself
| |||
| ||||
How to Remove the Instrument Cluster from a Volkswagen Transporter T6
Model: Volkswagen Transporter
MK 6, T6
- Years 2014-2025
Let's see how to remove the dashboard of a Volkswagen Transporter T6: you will need a 20 mm screwdriver and a plastic trim tool. Start by pulling the steering wheel towards you to gain maximum access. Use the trim tool to remove the ventilation grilles around the radio. Continue removing the grille near the steering wheel using the same method. This will allow you to take off the instrument panel cover, which is only held in place by pressure. To remove it, you must also pull off the top part of the steering wheel, which is also held in place by pressure. Just press, and both will come off. To remove the actual instrument cluster, start by unscrewing the two screws located underneath with the 20 mm screwdriver. Now, gently pull towards you and disconnect the connectors. Job done.
Updated on 18 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Transporter
(1990-2003 /
T4, MK 4)
In this guide, you will discover the main instructions to remove and detach the entire dashboard from the Volkswagen Transporter. First, get inside t…
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
In this video we can see how to remove the instrument panel from the dashboard of a Volkswagen Transporter T5: the first thing to do is to loosen the…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
This video demonstrates how to reset the service light for the service interval on a Volkswagen Transporter T6. Turn off the ignition, press and hold…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.163
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
