Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch in a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

This tutorial shows how to remove the ignition switch in a Volkswagen Golf, a task to perform in case of a malfunction or key blockage. First, unclip the upper cover of the steering column, then remove the lower cover by unscrewing the relevant screws.

Next, locate the two large retaining rivets on both sides and remove them using a chisel. Once this is done, you can detach the entire unit from the column, disconnect the connector, and proceed with replacing the damaged component.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Test the Starter Motor on Volkswagen Jetta
How to Test the Starter Motor on Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions for testing the operation of the starter motor on the Volkswagen Jetta. First, remove the starter motor by unscrewing the …
How to replace the starter motor on the Volkswagen Jetta TDI
How to replace the starter motor on the Volkswagen Jetta TDI
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the necessary instructions to remove and replace the starter motor on the Volkswagen Jetta TDI, in simple steps. First, open the vehicle's …
How to Remove the Ignition Cylinder in the Volkswagen Jetta?
How to Remove the Ignition Cylinder in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will see how to remove the ignition cylinder in the Volkswagen Jetta, a very simple and quick operation. First, position yourse…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos