Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery in a Volkswagen Golf 8

Model: Volkswagen Golf MK 8, Golf 8, Golf Viii - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Replacing the battery in the key fob of a Volkswagen Golf 8 is a very simple operation and requires no tools to proceed. Take the key fob and, using your fingers, pry open the battery compartment from the side where the car logo is located.

At this point, use the tip of a small screwdriver to pry up the edge of the battery and then proceed to remove and replace it. Remember to use the correct battery model, in this case, a flat CR 2032 battery rated at 3V.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Volkswagen Golf 8
How to Replace the Key Fob Battery on a Volkswagen Golf 8
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) To replace the battery in the key fob of the Volkswagen Golf 8, lower the side switch on the device. This allows you to slide the key out from the bo…
How to Change the Key Fob Battery on a Golf 7
How to Change the Key Fob Battery on a Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) How do you change the battery in the key fob of a Volkswagen Golf 7? Let's see how to do it. Take the key fob and press the button to release the met…
Replacing the Key Fob Battery for the Volkswagen Golf
Replacing the Key Fob Battery for the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The following steps will guide you on how to disassemble and replace the battery in the key fob for the Volkswagen Golf. First, take your key fob and…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos