Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Air filter

Replacing the engine air filter is very simple as the air box is located in an easily accessible position: once the front bonnet is opened, the air box is found on the front right of the engine compartment (when viewed from the front). Unscrew the fastening screws of the cover, remove the old filter, and clean out any dirt present inside the box, ensuring nothing falls into the intake duct. After cleaning, insert the new filter, ensuring the seal fits perfectly, and refit the cover by tightening the relevant screws.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Engine Air Filter
Volkswagen Passat (2005-2010 / B6, 3C) Periodic replacement of this filter is recommended to maintain high engine performance. Open the engine bonnet and locate the filter housing on the r…
Replacement of Engine Air Filter
Replacement of Engine Air Filter
Volkswagen Passat (1996-2005 / 3BG, B5) The engine air filter housing (air box) is located at the front left of the engine bay (when viewed from the front), that is, on the passenger side; …
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Volkswagen Passat (2005-2010 / B6, 3C) The following guide shows how to change the air filter of your car using classic DIY methods. The air filter is one of the engine parts most prone to…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos