Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : How do you replace the Volkswagen Tiguan rear light bulb?

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan MK 1, 5N - Years 2007-2016
Part: Rear light bulb
Operation: How do you replace the Volkswagen Tiguan rear light bulb?

To be able to replace the bulb in the rear light on the Volkswagen Tiguan, you need to open the tailgate so that the screws on the internal side of the light are visible: these screws must be loosened so that the light can be removed from the inside its housing, disconnecting the connectors inside. After removing the headlight, it will be necessary to detach the plate inside it so that the corresponding bulb can be replaced with a new spare part. Now you can reconnect the light, inserting it in its seat and checking that everything works correctly.


Posted on 24 December 2022 by ScegliAuto



Replacement of the reverse light bulb of the Volkswagen Tiguan.
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Below we will see the steps that will allow us to disassemble and replace the reverse light bulb and the rear bumper of the Volkswagen Tiguan. First,
Replacement of the reverse light bulb of the Volkswagen Tiguan.
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Today's steps will show us how to disassemble and replace the reverse light bulb of the Volkswagen Tiguan, following the instructions below. First, l
Replacing the reverse light bulb on the Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / MK 1, 5N) In this short and simple guide we will understand what are the steps to remove and replace the reverse light bulb on the Volkswagen Tiguan first seri

Other guides that may interest you

    Frequently Asked Questions

    • Tiguan 2016-2025 - How many reversing bulbs does a Volkswagen Tiguan have? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos