Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Rear Wiper Fuse Located in a Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Windshield wipers

If the rear wiper on your Volkswagen Golf suddenly stops working, the first thing to do is check the status of the respective fuse, which is indicated in this video. As shown, the fuse is located in the fuse box inside the cabin, specifically behind the small glove compartment on the driver's side. It is a 15A fuse and is the first in the lower column. If faulty, ensure to replace it with a spare of the same specifications and always work with the vehicle turned off to avoid any damage.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse for the Windscreen Wiper Motor on a 2011 Volkswagen Golf?
Where is the Fuse for the Windscreen Wiper Motor on a 2011 Volkswagen Golf?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) When the windscreen wiper motor stops working, it is necessary to check the related fuse before proceeding with its replacement. On a 2011 Volkswagen…
Fuse Box Diagram for the Volkswagen Golf
Fuse Box Diagram for the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) All the fuses in this vehicle are located within two boxes, both on the driver's side. The first is in the cabin, just below the steering column on t…
Replacing the Rear Wiper Arm on Volkswagen Golf 6
Replacing the Rear Wiper Arm on Volkswagen Golf 6
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To replace the rear wiper arm on a Volkswagen Golf, proceed as follows: lift the cover at the base of the wiper arm, take a spanner and unscrew the f…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos